home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Fritz: All Fritz
/
All Fritz.zip
/
All Fritz
/
FILES
/
UTILENUS
/
TOP.LZH
/
READ.ME
< prev
next >
Wrap
Text File
|
1992-05-03
|
3KB
|
101 lines
TOP Copyright (c) 1990,91,92 by TNC Technology, All Rights Reserved, GTDR
INSTALLATION REQUIREMENTS:
--------------------------
TOP is intended for the IBM PC, PC/XT, PC/AT, or 100% compatibles. DOS 3.0 or
greater is required. A Microsoft compatible mouse is recommended but not
required.
TOP installation requires about 900 Kbytes of free disk space on the
destination drive. About 300 Kbytes will be retured at the end of the
installation. Installation to a low density floppy is not possible.
TO INSTALL:
-----------
To install TOP, log on to the floppy drive containing the TOP release
files, and type:
INSTALL [drive_letter: [destination_path]]
Notes: -If no parameters are specified, TOP will be installed to C:\TOP
-If you wish to specify a destination_path, a drive_letter
must also be specified
-Be sure to put a colon (:) after drive_letter.
-Do not use a leading or trailing backslash (\) before
or after destination_path.
-Be sure to put a space between drive_letter: and destination_path.
Examples: INSTALL --- will install TOP to C:\TOP
INSTALL D: --- will install TOP to D:\TOP
INSTALL D: TOOLS\TOP --- will install TOP to D:\TOOLS\TOP
During the installation you will be asked for your TOP registration number.
If this is a shareware installation and you do not have number, just press
<ENTER> at the prompt.
INSTALL is a batch file. We made INSTALL a batch file so you can examine
it first (if desired) to see what it's going to do. INSTALL does NOT modify
your AUTOEXEC.BAT or CONFIG.SYS, it just copies files to a directory and
uncompresses them. However, some slight modifications to AUTOEXEC.BAT and
CONFIG.SYS are recommended--see POST-INSTALL NOTES below.
Up to date release information is available after starting TOP and typing:
HELP !READ_ME
and
HELP !-NEW-!
HELP is also available by pressing <F1>, or by pressing your left and right
mouse buttons simultaneously and releasing them over the word HELP. A left
click on any word in the HELP window accesses HELP for that topic.
POST-INSTALL NOTES:
-------------------
It is recommended the TOP startup command be added as the last line of
your AUTOEXEC.BAT file. To do this you would add the line:
c:\top\top
as the last line of your AUTOEXEC.BAT file (if you installed TOP to
the default C:\TOP).
Important: If you do not have a FILES= statement in your CONFIG.SYS
file, or do not have a CONFIG.SYS file, you must create one and set the
FILES equal to or greater than 9 (the default if not specified is 8). To
create a CONFIG.SYS file from scratch (if you don't have one) type:
cd\<ENTER>
copy con config.sys<ENTER>
files=20<CTRL+Z><ENTER>
Remember to reboot after any AUTOEXEC.BAT or CONFIG.SYS changes so the
changes will take effect.
CHANGING TOP PARAMETERS
-----------------------
After installing TOP, change to the TOP directory and type:
TOPSET
TECHNICAL SUPPORT
-----------------
Questions? Suggestions? Problems? Please feel free to call us at:
716-872-1377 (Voice/FAX)
716-872-4913 (BBS, 8-N-1)
Thank you for using TOP!